@article{ author = {Mortazavi, S. and Mokhtari-dizaji, M.}, title = {Effect of cross-sectional area of high-intensity focused ultrasound (HIFU) on the thermal distribution of the target tissue (Research Article)}, abstract ={HIFU technology is a non-invasive treatment method based on the conversion of acoustic energy into thermal energy focused on the target area. In this study, the effect of radiation cross- section on heat distribution in the target tissue is investigated. To investigate the effect of radiation cross- section, in this study, finite element method and COMSOL simulation software were used in the linear emission mode of ultrasonic waves. At a maximum input sound intensity of 10 W/cm2, the pressure wave equation was solved by considering thermo-viscous fluid at two cross- sections of 1.5 and 0.8 cm2. Based on the Pennes heat transfer equation, the heat field distribution in skin tissue, subcutaneous fat, and muscle was calculated. To validate the simulation results, the correlation between the results of the mathematical model the experimental method with a 95% confidence level (p<0.05) was evaluated. At an input sound intensity of 10 W/ cm2 and at a focal length of 4.5 mm from the skin surface, with an increase in cross- section from 0.8 to 1.5 cm2, the maximum sound pressure from 8.6 to 20.9 MPa and the maximum temperature from 60 to 139 °C. The results showed that the sound pressure distribution and the thermal dose of the target tissue depended on the cross-sectional area of the sound transducers. It is concluded that in order to achieve the selected treatment protocol, the treatment plan should be simulated based on radiation input and physical characteristics of the tissue.}, Keywords = {High intensity focoused ultrasound, Cross- section of radiation, Sound pressure distribution, Thermal distribution.}, volume = {9}, Number = {1}, pages = {1-9}, publisher = {Acoustical Society of Iran}, title_fa = {اثر سطح- مقطع تابش فراصدای متمرکز پر- شدت (هایفو) بر توزیع حرارتی بافت هدف (مقاله پژوهشی)}, abstract_fa ={فن‌آوری هایفو به عنوان روش درمانی غیر‌تهاجمی مبتنی بر تبدیل انرژی صوتی به انرژی حرارتی به صورت کانونی در ناحیه هدف است. در این تحقیق اثر سطح- مقطع تابش بر توزیع حرارت در بافت هدف بررسی می‌شود. برای بررسی اثر سطح-  مقطع تابش، در این مطالعه از روش عنصر متناهی و نرم‌افزار شبیه‌سازی کامسول، در حالت انتشار خطی امواج فراصدا استفاده شد. در بیشینه شدت صوتی ورودی 10 وات بر سانتی‌مترمربع، معادله موج فشار با در نظر گرفتن سیال گرمالزج، در دو سطح- مقطع  1/5 و 0/8 سانتی‌مترمربع حل شد. براساس معادله انتقال حرارتی پنس، توزیع میدان حرارتی در بافت پوست، چربی زیر پوستی و ماهیچه محاسبه شدند. برای اعتبارسنجی نتایج شبیه‌سازی، همبستگی نتایج حاصل از الگوی ریاضی و نتایج تجربی با سطح اطمینان 95 درصد ارزیابی شدند (عدد p کم‌تر از 0/05). در شدت صدای ورودی 10 وات بر سانتی‌مترمربع و در فاصله کانونی 4/5 میلی‌متر از سطح پوست، با افزایش سطح- مقطع از 0/8 به 1/5 سانتی‌مترمربع، بیشینه فشار صدا از 8/6 به 20/9 مگاپاسکال و بیشینه دما از 60 به 139 درجه سلسیوس افزایش یافت. نتایج نشان دادند، توزیع فشار صدا و دُز حرارتی بافت هدف به سطح مقطع تراگذارهای صدا وابسته است. نتیجه‌گیری می‌شود برای دستیابی به پروتکل درمان منتخب، بایستی طرح درمان براساس ورودی تابش و مشخصات فیزیکی بافت شبیه‌سازی شود.}, keywords_fa = {امواج فراصدای متمرکز پر- شدت, سطح- مقطع تابش, توزیع فشار صدا, طرح حرارتی.}, url = {http://joasi.ir/article-1-208-en.html}, eprint = {http://joasi.ir/article-1-208-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Fallah, M. and MilaniMoghaddam, H.}, title = {Phonon transport analysis of CsCaX3 (X=Cl, Br) perovskites using the density functional theory (Research Article)}, abstract ={Phonon transport of CsCaBr3 and CsCaCl3 halide perovskites was investigated to identify their potential applications in various fields including cooling and thermoelectric. Ab-initio studies of these materials were performed in their cubic phase in generalized gradient approximation. Second and third order force constants were calculated with supercell approach and phonopy and phono3py packages. Lattice constant was obtained 5.463 and 5.768 the for CsCaCl3 and CsCaBr3 respectively. From a comparison of electron density and phonon properties, it was found that the halide atom in both compounds plays an important role in phonons’ propagation, while calcium atom has a negligible role in phonon scattering and phonon group velocity. Phonon velocities of both materials at intermediate frequencies (between 2 and 4 THz) are 5000 and 3000 m/s, and their phononic lifetime is 0.2 and 0.1 ps, for CsCaCl3 and CsCaBr3, respectively. Due to the higher phonon transport of CsCaCl3 in almost frequency and with a difference of 2000 m/s in the middle frequency range, it is predicted to be more effective in applications requiring higher acoustic and thermal conductivity. However, CsCaBr3 is expected to be useful in thermoelectric applications owning to rattling motion and consequently higher phonon scattering of Cs atom in CaBr6 cages.}, Keywords = {Perovskite, Phononic transport, Phonon group velocity, Phonon scattering, Phonon lifetime.}, volume = {9}, Number = {1}, pages = {10-17}, publisher = {Acoustical Society of Iran}, title_fa = {تحلیل ترابرد فونونی در پرووسکیت‌های (X=Cl, Br) CsCaX3 با استفاده از روش نظریه تابعی چگالی (مقاله پژوهشی)}, abstract_fa ={ترابرد فونونی پرووسکیت‌های هالیدی 3CsCaCl و 3CsCaBr به‌منظور شناسایی کاربردهای بالقوه آن‌ها در زمینه‌های مختلفی از جمله خنک‌سازی و گرمابرقی بررسی شدند. مطالعات اصول اولیه مواد در فاز مکعبی‌شان در تقریب شیب تعمیم‌یافته انجام شد. مرتبه‌های دوم و سوم ثابت نیرو با رهیافت ابریافته و با کدهای فونوپای و فونو3پای برآورد شدند. ثابت شبکه مواد برابر oA 5/463 و 5/768 به‌ترتیب برای 3CsCaCl و 3CsCaBr به‌دست آمدند. از مقایسه چگالی ابر الکترونی و مشخصه‌های فونونی، اتم هالید هر دو ماده نقش مهمی در پراکندگی فونون‌ها دارد، اما اتم کلسیم نقش ناچیزی در برخوردها و سرعت گروه فونونی دارد. سرعت ترابرد فونونی دو ماده در بسامدهای میانی (بین 2 الی 4 تراهرتز)، حدود 5000، 3000 متر بر ثانیه و عمر فونونی آن‌ها در قله برخوردها برابر 0/2 و 0/1 پیکوثانیه به‌ترتیب برای 3CsCaCl و 3CsCaBr به‌دست آمد. ماده 3CsCaCl به علت داشتن ترابرد فونونی بیش‌تری در تقریباً همه بازه‌های بسامدی و با اختلاف 2000 متر بر ثانیه در بازه‌های میانی بسامدی، پیش‌بینی می‌شود در کاربردهای مورد نیاز برای رسانندگی صوتی و گرمایی بالاتر مؤثر باشد. این در حالی‌ است که ماده 3CsCaBr به‌دلیل حرکت لرزشی و برخوردهای فونونی مهمی که اتم سزیم در قفسه 6CaBr دارد، انتظار می‌رود در زمینه گرمابرقی مفید واقع شود.  }, keywords_fa = {پرووسکایت, ترابرد فونونی, سرعت گروه فونونی, پراکندگی فونونی, عمر فونونی.}, url = {http://joasi.ir/article-1-207-en.html}, eprint = {http://joasi.ir/article-1-207-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Vafaeian, A. and Sajedi, H. and Borna, K. and Alimohammadi, D. and Sarai, P.}, title = {The feasibility of automatic identification of principal Gushehs of Shur Dastgāh, using the musical audio features (Research Article)}, abstract ={The main aim of this study is to investigate the importance of the 21 temporal, spectral, and cepstral features in detecting the principal Gushehs of Shur. In the present study, a dataset was created, including 173 pieces of music, consisting of six principal Gushehs of Shur Dastgāh, played by four musical instruments: Tar, Setar, Santur, and Barbat, based on Mirzaabdollah Radif (Repertoire). To investigate the significance of each temporal, spectral, cepstral feature in identifying the six principal Gushehs of Shur, the 21 musical features (extracted from the literature) were scored by using the Fisher scale. Then, the LDA classifier was trained, and then three superior and best-scored features (out of 21 ones) were selected to measure the classifier capability of six Gushehs detection for each of four instruments separately and also for all instruments. Findings show that among the 21 features, cepstral features gained the highest scores in distinguishing the six Gushehs and were better off than spectral and temporal features; but in general, none of them could distinguish the Gushehs from each other. Though, despite the acceptable efficiency of musical features in automatic detection of Western music, it is not efficient in Persian traditional music.}, Keywords = {Iranian traditional music, Music information retrieval, Automatic detection, Musical feature extraction, Classifier.}, volume = {9}, Number = {1}, pages = {18-27}, publisher = {Acoustical Society of Iran}, title_fa = {امکان‌سنجی شناسایی خودکار گوشه‌‌های اصلی دستگاه شور با استفاده از ویژگی‌های شنیداری موسیقایی (مقاله پژوهشی)}, abstract_fa ={هدف از انجام این پژوهش، بررسی میزان اهمیت هر یک از 21 ویژگی‌ زمانی، طیفی و سِپسترال در شناسایی گوشه‌‌های اصلی دستگاه شور بوده است. در این پژوهش، ابتدا پایگاه‌ داده‌ای متشکل از شش گوشۀ اصلیِ دستگاه شور، براساس ردیف میرزا عبدالله و به تفکیک چهار ساز تار، سه‌تار، سنتور و بَربَط و در مجموع 173 قطعه ضبط و ایجاد شد. به‌منظور بررسی میزان اهمیت هر یک از ویژگی‌های شنیداری در تفکیک گوشه‌ها از یکدیگر، ابتدا با استفاده از مقیاس فیشر، هر یک از 21 ویژگی صوتی در نرم‌افزار متلب امتیازدهی شده و سپس از بین آن‌ها، سه ویژگی برتر انتخاب شدند. در مرحله بعد، با استفاده از دسته‌بند واکافت (آنالیز) تمایز خطی، امکان جداسازی گوشه‌ها از یکدیگر، برای هر یک از سازها به‌طور جداگانه و نیز به‌صورت کلی بررسی شد. نتایج پژوهش نشان دادند که در بین 21 ویژگی استخراج‌شده، ویژگی‌های سِپسترال بالاترین امتیاز را در جداسازی گوشه‌ها از یکدیگر کسب کردند و نسبت به ویژگی‌های زمانی و طیفی وضعیت بهتری داشتند؛ ولی در کل، هیچ‌ یک از این ویژگی‌ها‌، توانایی تفکیک و شناسایی شش گوشه اصلی دستگاه شور را نداشتند. با اینکه ویژگی‌های شنیداری کارکرد قابل قبولی در شناسایی خودکار موسیقی غربی و به‌خصوص شناسایی سبک موسیقی دارند، به دلیل ماهیت منحصربه‌فرد موسیقی سنتی ایرانی، در تفکیک و شناسایی گوشه‌های موسیقی سنتی ایرانی، از کارآمدی لازم برخوردار نیستند.}, keywords_fa = {موسیقی سنتی ایرانی, بازیابی اطلاعات موسیقایی, شناسایی خودکار, استخراج ویژگی‌ موسیقایی, دسته‌بند.}, url = {http://joasi.ir/article-1-204-en.html}, eprint = {http://joasi.ir/article-1-204-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Mirbeygi, M. and Mahabadi, A. and Ranjbar, A.}, title = {Classification of noise-robust speech features in the speaker authentication system (Research Article)}, abstract ={Automatic speaker recognition has a wide range of applications in industrial and security systems and requires the extraction of speech signal features. The use of the feature matrix is ​​very important in real-time recognition of the speaker, and the presence of environmental and processing noise leads to a violation in the characteristics of the features and the production of recognition errors. Increasing the accuracy of recognition detection requires the noise removal process to correctly determine the energy characteristics, energy entropy, zero- crossing rate, spectral centroid, spectral spread, spectral entropy, spectral flux, and spectral roll off the signal. In designing real-time and reliable algorithms, there are critical processes of correct speech extraction, sensitivity detection, and measuring the robustness of signal parameters to eliminate noise and improve speech quality, which play a key role in improving the signal-to-noise ratio. In this paper, the classification of speech signal features for designing real-time and noise-robust speaker recognition algorithms in measuring its robustness are investigated. The proposed method of noise removal uses a binary mask with a robust feature and the experimental results of the experiments on the standard data show the rate of signal improvement to the noise of approximately 2 to 3 db. The feature matrix evaluation for the authentication system consists of mel frequency coefficient, linear prediction coefficient and, cepstrum coefficient, which has been evaluated by the Euclidean distance method in another experimental standard data set. Our proposed method achieves on overall 80% real-time recognition accuracy in noisy data set. }, Keywords = {Classification of speech features, Speaker authentication, Noise-robust, Speech signal, Noise.}, volume = {9}, Number = {1}, pages = {28-39}, publisher = {Acoustical Society of Iran}, title_fa = {طبقه‌بندی ویژگی های گفتار مقاوم به نوفه در سامانه تعیین هویت گوینده (مقاله پژوهشی)}, abstract_fa ={تشخیص­ خودکار هویت ­گوینده کاربردهای وسیعی در سامانه­ های صنعتی و امنیتی دارد و وابسته به ویژگی علامت گفتار است. کاربرد ماتریس ویژگی در شناسایی بی­ درنگ گوینده بسیار مهم و وجود نوفه محیطی و پردازشی منجر به تغییر مشخصات ویژگی­ ها و تولید خطا در تعیین ­هویت است. افزایش ­دقت در تشخیص هویت به فرایند حذف ­نوفه برای تعیین صحیح ویژگی‌های انرژی، آنتروپی انرژی، نرخ عبور از صفر، مرکز ثقل طیفی، گسترش طیفی، آنتروپی طیفی، شار طیفی، و رل­ آف طیفی از علامت ­گوینده نیاز دارد. در طراحی الگوریتم‌های بی­درنگ و قابل ­اعتماد، فرایندهای مهم استخراج صحیح گفتار، شناسایی میزان­ حساسیت و سنجش میزان ­مقاومت مؤلفه‌های علامت برای حذف نوفه و بهبود کیفیت­ گفتار در بهبود علامت ­به نوفه نقش اساسی دارند. هدف اصلی این مقاله ارایه روش طبقه‌بندی ویژگی­­ های علامت گفتار جهت طراحی الگوریتم ­های بی­ درنگ تعیین­ هویت گوینده و مقاوم ­به نوفه با سنجش میزان مقاومت آن است. روش پیشنهادی حذف ­نوفه از ماسک دودویی با ویژگی­ مقاوم مشخص­ بهره­ می­ برد و نتایج تجربی آزمایش‌ها روی داده­ ها، بهبود علامت ­به نوفه 2 الی 3 دسی ­بل را نشان می‌دهد. ارزیابی ماتریس ویژگی در سامانه تشخیص هویت از ضریب کپسترال بسامد­مل و ضریب­ پیشگویی خطی و ضریب­کپستروم تشکیل­ شده که با روش فاصله­ یابی اقلیدسی در مجموعه ­داده ­های استاندارد ارزیابی شده­ است. روش پیشنهادی با وجود داده ­های نوفه­ای توانسته قدرت تشخیص تعیین هویت ­گوینده را به دقت بالای 80 درصد و سرعت بی­ درنگ افزایش دهد.  }, keywords_fa = {طبقه‌بندی ویژگی های گفتار, تعیین هویت گوینده, مقاوم به نوفه, علامت گفتار, نوفه.}, url = {http://joasi.ir/article-1-192-en.html}, eprint = {http://joasi.ir/article-1-192-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Salehi, H. and Azizi, M.}, title = {Investigation of defects in the thermal conductivity and phonon spectra of graphene (Research Article)}, abstract ={Graphene is one of the carbon nanostructures that has been considered in many industries today due to its high thermal properties. In this work, due to the high thermal conductivity and the presence of various defects during the synthesis of graphene, the simultaneous investigation of the effects of the vacancy defects and Stone-Wales to high-density defects on the thermal conductivity of graphene has been studied. This work has been used to simulate a reverse non-equilibrium molecular dynamics simulation with using Airebo potential was used to model the interactions between  all atoms, which is an empirical potential. This describes the potential of non-binding interactions by matching the behavior of inter-molecular interactions, which is here for carbon-carbon interactions, graphene is used. It also studies the phonon spectra and overlaps on the thermal conductivity of graphene nanoribbons. The results show that the thermal conductivity of graphene nanoribbons reduces both defects by a maximum of 46% for low deficit density and a minimum of 25% for maximum density, that is, decreasing the density of the defect in the thermal conductivity reduction relative to the defective nano-tubes.}, Keywords = {Graphene nanoribbons, Dynamic molecular simulation, Vacancy defect, Stone-Wales defect, Thermal conductivity.}, volume = {9}, Number = {1}, pages = {40-47}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی نواقص در هدایت حرارتی و طیف فونونی گرافن (مقاله پژوهشی)}, abstract_fa ={گرافن یکی از نانو‌ساختارهای کربنی است که با توجه به خواص حرارتی بالای آن امروزه در صنایع بسیاری مورد توجه قرار گرفته است. در این‌کار با توجه به هدایت حرارتی بسیار بالا و وجود نقص‌های متفاوت در طول سنتز گرافن به بررسی هم‌زمان اثر نقص‌های جای‌خالی و استون- والز تا تراکم نقص بالا روی هدایت حرارتی گرافن پرداخته شده است. در این‌کار از شبیه‌سازی دینامیک مولکولی غیر‌تعادلی معکوس با استفاده از پتانسیل ایربو که یک پتانسیل تجربی است، استفاده شده است. این پتانسیل بر‌هم‌کنش‌های غیر‌پیوندی را از طریق تطبیق رفتار بر‌هم‌کنش‌های بین‌مولکولی توصیف می‌کند، که در این‌جا برای برهم‌کنش کربن- کربن گرافن استفاده می‌شود. هم‌چنین به بررسی طیف فونونی و هم‌پوشانی روی هدایت حرارتی نانو‌روبان گرافن پرداخته شده است. نتایج نشان می‌دهد که هدایت حرارتی نانو‌روبان گرافن حاوی هر دو نقص حداکثر به میزان 46 درصد برای تراکم نقص کم و حداقل میزان 25 درصد برای حداکثر تراکم کاهش می‌یابد، یعنی با افزایش تراکم نقص میزان کاهش هدایت حرارتی نسبت به نانو‌روبان بدون نقص کاهش کم‌تری دارد.}, keywords_fa = {نانو‌روبان گرافن, شبیه‌سازی دینامیک مولکولی, نقص جای‌خالی, نقص استون-‌ والز, هدایت حرارتی.}, url = {http://joasi.ir/article-1-188-en.html}, eprint = {http://joasi.ir/article-1-188-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Mohamadi, S. and Movahedin, M. and MokhtariDizaji, M.}, title = {Determination of optimal parameters of ultrasonic waves on permatogenesis process of neonate mouse testis (Research Article)}, abstract ={Ultrasonic waves are rapidly emerging as an innovative regeneration technique, improving cell performance in tissue engineering. In this study, the optimal parameters of low intensity pulsed ultrasonic stimulation (LIPUS) waves on the testicular tissue of neonatal mice in the control and experimental groups were evaluated to improve the process of spermatogenesis and aid treatment of infertility with male causes. In the first phase of the study, the temperature was controlled to prevent thermal effects, and in the second and third phases, the optimal intensity and the optimal duty cycle of ultrasonic waves were evaluated, respectively. Histological H&E evaluations indicate that ultrasonic waves with an intensity of 0.5 W/cm2 and 40% duty cycle during 14 days of organ culture have a better effect on maintaining the structure of testicular tissue compared to other intensities and duty cycles. Additionally, LIPUS waves had a propitious influence on the enhancement of spermatogenesis in the testicular tissue of neonatal mice. Quantitative histological findings showed a significant increase in the area of ​​testicular tissue stimulated by LIPUS compared to the control group (p<0.05).}, Keywords = {Ultrasonic waves, Testicular tissue, Spermatogenesis.}, volume = {9}, Number = {1}, pages = {48-54}, publisher = {Acoustical Society of Iran}, title_fa = {تعیین مؤلفه‌های بهینه امواج فراآوایی بر روند اسپرم‌زایی بیضه موش نوزاد (مقاله پژوهشی)}, abstract_fa ={امواج فراآوا به‌عنوان یک نوآوری با هدف بازسازی بافت و بهبود عملکرد یاخته‌ای در مهندسی بافت بسیار مورد توجه قرار گرفته‌اند. در این مطالعه مؤلفه‌های بهینه تابش امواج فراآوا با شدت پایین روی بافت بیضه موش نوزاد در جهت بهبود روند اسپرم‌زایی و کمک به درمان ناباروری با علل مردانه، در دو گروه کنترل و آزمایشی مورد ارزیابی قرار گرفته‌اند، در فاز اول از آزمایش به‌منظور جلوگیری از آثار حرارتی کنترل دما صورت گرفت و در فاز دوم و سوم به ترتیب میزان شدت بهینه و بهره ‌کاری بهینه تابش امواج فراآوا مورد ارزیابی قرار گرفت با توجه به ارزیابی‌های بافت‌شناسی توسط رنگ‌آمیزی هماتوکسیلین- ائوزین انجام‌شده مشخص شد که امواج فراآوا با بسامد 1 مگاهرتز، شدت 0/5 وات بر سانتی‌مترمربع و بهره ‌کاری ٤٠ درصد نسبت به دیگر شدت‌ها و بهره‌های کاری مورد بررسی تأثیرات بهتری روی حفظ ساختار بافت بیضه طی چهارده روز کشت را دارند. هم‌چنین امواج فراآوا به‌صورت تپ (پالس) با شدت پایین دارای تأثیرات مطلوب روی پیشرفت روند اسپرم‌زایی در بافت بیضه موش نوزاد هستند. نتایج حاصل از ارزیابی بافت‌شناسی به‌صورت کمّی نشان داد که افزایش معنا‌داری در میزان مساحت بافت بیضه تحت تأثیر تابش امواج فراآوا نسبت به گروه کنترل وجود دارد. (0/05p<).}, keywords_fa = {امواج ‌‌‌‌فراآوا, بافت بیضه, اسپرم‌زایی.}, url = {http://joasi.ir/article-1-209-en.html}, eprint = {http://joasi.ir/article-1-209-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {ZabihiNejad, M. and Dehghan, A. and Farmani, M.}, title = {Implementation and evaluation of Curle’s acoustic analogy in order to far-field noise prediction for a square geometry (Research Article)}, abstract ={In this paper, we aim to implement, evaluate and validate Curle’s acoustic analogy in predicting far-field noise emitted due to the turbulent flow around a two-dimensional square geometry. Flow is considered to be incompressible with two Reynolds numbers of 46000 and 69000. Open- source software OpenFOAM is utilized for flow simulation using both k-w and large eddy simulation turbulence models. To predict far-field sound pressure levels, the Curle acoustic analogy implemented within the software and pressure fluctuations data over the surface of a square geometry have been used as one of the inputs to the Curle analogy. The average aerodynamic coefficients, mean pressure coefficients, and Strouhal number were determined and it was found that the fluctuations of  lift and drag forces, as well as the turbulence intencity are the main factors affecting the far field sound pressure level. The far-field sound pressure is well predicted by a combination of large eddy simulation and Curle’s acoustic analogy, which at two different observer locations and two Reynolds numbers of 46000 and 69000, are 90.62 and 97.8 (dB), respectively. Finally, the agreement of numerically predicted far-field sound pressure level with the experimental results indicates the efficiency of Curle’s acoustic analogy incorporated within the OpenFoam.}, Keywords = {Numerical investigation, Large eddy simulation, K-W turbulence models, Curle’s acoustic analogy, OpenFOAM software.}, volume = {9}, Number = {1}, pages = {55-69}, publisher = {Acoustical Society of Iran}, title_fa = {پیاده‌سازی و ارزیابی قیاس صوتی کرل به‌منظور پیش‌بینی نوفه دوردست برای یک هندسه مربعی (مقاله پژوهشی)}, abstract_fa ={در این مقاله با هدف پیاده‌سازی، ارزیابی و اعتبار‌سنجی قیاس صوتی کرل در پیش‌بینی نوفه دوردست، جریان اطراف هندسه مربعی با اعداد رینولدز 46000 و 69000، در نرم‌افزار متن‌باز اوپن‌فوم شبیه‌سازی شده است. برای حل جریان تراکم‌ناپذیر از روش حل معادلات غیر‌دائم متوسط‌گیری‌شده به روش رینولدز با الگوی تلاطم کا‌- ‌‌امگا و رهیافت شبیه‌سازی گردابه‌های بزرگ استفاده شده است. به‌منظور پیش‌بینی مقادیر تراز فشار صدا در دوردست با استفاده از قیاس صوتی کرل، داده‌برداری مقادیر نوسانات فشار روی سطح هندسه مربعی با استفاده از ابزار کاوشگر انجام شده است. در این مطالعه متوسط ضرایب آیرودینامیکی (ضرایب پسا و برا)، متوسط ضریب فشار و عدد استروهال بررسی شده و مشخص گردید که نوسانات نیروهای برآ، پسا و تلاطم جریان از عوامل تأثیر‌گذار بر تراز فشار صدا هستند. تراز فشار صدا در دور‌دست با رهیافت گردابه‌های بزرگ به خوبی پیش‌بینی شده است که در موقعیت دو شنونده مورد نظر برای اعداد رینولدز 46000 و 69000 به‌ترتیب مقدار 90/62 و 97/8 دسی‌بل است. در نهایت انطباق مقادیر تراز فشار صدا در دوردست از نرم‌افزار اوپن‌فوم با نتایج تجربی، نشان‌دهنده کارآیی و دقت روش ترکیبی ارائه‌شده در این مقاله و صحت قیاس صوتی کرل در نرم‌افزار اوپن‌فوم است.  }, keywords_fa = {بررسی عددی, شبیه‌سازی گردابه‌های بزرگ, الگوی تلاطم کا- امگا, قیاس صوتی کرل, نرم‌افزار اوپن‌فوم.}, url = {http://joasi.ir/article-1-203-en.html}, eprint = {http://joasi.ir/article-1-203-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Izadi, Z. and Salehi, H.}, title = {Investigation of thermodynamic and phononic properties of HgTe in Zinc Blende phase using pseudopotential method (Research Article)}, abstract ={In this paper, the phononic and thermodynamic properties of mercury telluride (HgTe) in Zinc Blende phase have been studied. The calculations have been performed with the pseudopotantial method by using Quntume Espresso package that is based on density functional theory. The result of the band structure indicates that the bottom of the conduction band touches the top of the valence band at Г point, this giving rise to zero bandgaps. The phonon spectrum shows that this compound has a frequancy gap between 80 cm-1 and 127 cm-1. Also, the study of thermal properties shows that the heat capacity of this compound in the Zinc Blende phase in low temperatures according to experience is proportional to the third power of temperature and high temperatures reach a value of saturation that is not temperature-dependent, which is consistent with experimental facts.}, Keywords = {Mercury telluride, Phononic properties, Thermodynamic properties.}, volume = {9}, Number = {1}, pages = {70-77}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی ویژگی‌های فونونی و ترمودینامیکی تلورایدجیوه در فاز بلندروی با استفاده از شیوۀ شبه‌پتانسیل (مقاله پژوهشی)}, abstract_fa ={در این مقاله خواص فونونی و ترمودینامیکی ترکیب تلورایدجیوه (HgTe) در فاز بلند روی مورد بررسی قرار می‌گیرد. محاسبات با استفاده از روش شبه‌پتانسیل در چارچوب نظریۀ تابعی چگالی و با استفاده از نرم‌افزار کوانتوم اسپرسو صورت گرفته است. نتایج ساختار نواری برای این ترکیب نشان می‌دهند که انتهای نوار رسانش و بالای نوار ظرفیت در نقطۀ Г به هم می‌رسند و این موجب به وجود آمدن گاف نواری صفر می‌شود. نمودار پاشندگی فونونی نشان می‌دهد که این ترکیب دارای گافی بین 1cm-‌80 تا 1cm- 127 است. هم‌چنین بررسی ویژگی‌های گرمایی نشان می‌دهندکه ظرفیت گرمایی این ترکیب در فاز بلند روی در دماهای پایین طبق تجربه متناسب با توان سوم دما می‌باشد و در دماهای بالا به یک مقدار اشباع رسیده که به دما وابسته نیست که این امر با واقعیات تجربی سازگار است.}, keywords_fa = {تلورایدجیوه, خواص فونونی, خواص ترمودینامیکی.}, url = {http://joasi.ir/article-1-190-en.html}, eprint = {http://joasi.ir/article-1-190-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Rezaee, K. and Ghaderi, F. and Naghavi, F.}, title = {Multilevel pain recognition to analyze infant crying sound using fractal dimension features and logistic regression with a maximum likelihood classifier (Research Article)}, abstract ={In contrast to other automatic pain detection methods for infants, the diagnosis of pain through sound analysis to understand the infant's condition has not received much attention. Although extracting appropriate features from infant sounds when crying leads to desirable classification results, this requires sufficient knowledge of the features acquired and an effective selection of attributes. In this paper, several descriptors are proposed for extracting discriminative information and weighting voting in feature selection. Also, the improved logistic regression method with maximum likelihood to classify the type of pain was employed. The proposed method was evaluated by an infants sound dataset. A total recognition of 96.6% has been achieved in classifying five different levels of pain sense using different types of features. The results indicate that the optimized classification is significantly more effective than similar solutions in terms of diagnostic accuracy. Challenges such as uncertainty and the high classification errors, which often occur with the application of unseen data, have been addressed due to the adaptation ability of the proposed method. The comparative analysis illustrates the fact that by using the suggested method combined with perceptual features, significant progress has been made in the performance of multilevel diagnosis.}, Keywords = {Pain recognition, Infant cry, Sound processing, Feature extraction, Weighting voting, Optimized classifier.}, volume = {9}, Number = {1}, pages = {78-90}, publisher = {Acoustical Society of Iran}, title_fa = {بازشناختی چندترازی درد جهت واکافت صدای گریه نوزاد با به کارگیری ویژگی‌های بُعد شکستال و رگرسیون منطقی با طبقه‌بند بیشینه محتمل (مقاله پژوهشی)}, abstract_fa ={در تقابل با دیگر شیوه‌های آشکارسازی خودکار درد در نوزادان، تشخیص درد از طریق واکافت صدا برای درک وضعیت نوزاد چندان مورد توجه نبوده است. هر چند استخراج ویژگی­ های مناسب از صداهای نوزاد در زمان گریه کردن به نتایج مطلوب طبقه ­بندی منجر می‌شود، اما این مسئله مستلزم وجود دانش کافی در مورد ویژگی­ های به‌دست‌آمده و نیز انتخاب مؤثر صفات است. در این مقاله، چندین توصیف گر برای استخراج اطلاعات تفکیک‌پذیر در کنار رأی‌گیری وزنی در انتخاب ­ویژگی پیشنهاد شده‌اند. هم‌چنین، شیوه بهبودیافته درست­ نمایی رگرسیون منطقی جهت طبقه­ بندی درد به‌کار گرفته شد. شیوه پیشنهادی توسط مجموعه ای از صداهای ضبط‌شده نوزادان مورد ارزیابی‌ قرارگرفت. با استفاده از انواع مختلفی از ویژگی­ ها، بازشناختی کلی معادل 96/6 درصد در طبقه­ بندی پنج تراز مختلف از حس درد رقم خورده است. نتایج حاکی از آن هستند که طبقه ­بندی بهینه‌سازی‌شده نسبت به راه­کارهای مشابه از نظر دقت تشخیص دارای اثربخشی چشم‌گیری است. چالش­ هایی چون عدم­ قطعیت و بروز خطاهای طبقه ­بندی بالا که اغلب با اعمال داده ­های دیده نشده رخ می­دهند، به‌دلیل توانایی انطباق­ پذیری شیوه پیشنهادی حل ‌شده‌اند. تجزیه‌ و تحلیل مقایسه ­ای نشان از این واقعیت دارد که بر مبنای شیوه پیشنهادی در ترکیب با و یژگی­های ادراکی، پیشرفت چشم‌گیری در عملکرد تشخیص چندترازی حاصل شده است.}, keywords_fa = {بازشناختی درد, گریه نوزاد, پردازش صدا, استخراج ویژگی, رای‌گیری وزنی, طبقه بند بهینه.}, url = {http://joasi.ir/article-1-194-en.html}, eprint = {http://joasi.ir/article-1-194-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {Bahreini, A. and TalafiNoghani, M. and SaghafiYazdi, M.}, title = {Experimental comparison of sound transmission loss in pure aluminum and aluminum composite foams with 3wt% carbon nanotube and graphene nanoplate (Research Article)}, abstract ={In recent years, the importance of noise control has dramatically increased due to noise pollution. In this study, in order to improve the acoustic performance of pure aluminum foam, 3wt% carbon nanotube (CNT) and 3wt% graphene nanoplate (GNP) were added to the pure aluminum foam, foams were made with 60% porosity by 500 microns in diameter size. Then the transmission loss in Al-3wt%CNT and Al-3wt%GNP foams were compared to that of pure aluminum foam. The paper is focused on the sound transmission loss (STL) of the pure aluminum, Al-3wt%CNT and Al-3wt%GNP foams. The results showed that the addition of 3wt%CNT and 3wt%GNP respectively had about 20 and 7 dB in sound transmission loss in comparison to the pure aluminum foam. A better performance of nanotubes in comparison to nanoplates is due to the occurrence of Thermoacoustic phenomenon in the nanotubes and as a result of conversion of acoustic energy into heat energy.}, Keywords = {Sound transmission loss, Composite aluminum-carbon nanotube foam, Composite aluminum-graphene nanoplate foam, Thermoacoustic phenomenon.}, volume = {9}, Number = {1}, pages = {91-99}, publisher = {Acoustical Society of Iran}, title_fa = {مقایسه تجربی افت تراگسیل صدا در فوم‌های آلومینیوم خالص و کامپوزیت آلومینیوم با 3 درصد وزنی نانولوله کربنی و نانوصفحه گرافنی (مقاله پژوهشی)}, abstract_fa ={در سال‌های اخیر، اهمیت مهار نوفه به‌دلیل آلودگی نوفه‌ای به طور چشمگیری افزایش یافته است. در این پژوهش به منظور بهبود عملکرد صوتی فوم آلومینیوم خالص، 3 درصد وزنی نانولوله کربنی و 3 درصد وزنی نانوصفحه گرافنی به فوم آلومینیوم خالص افزوده شدند، فوم‌ها با 60 درصد تخلخل و اندازه قطر حفرات 500 میکرون ساخته شدند. سپس، افت تراگسیل صدا در فوم‌های آلومینیوم- 3 درصد وزنی نانولوله کربنی و نانوصفحه گرافنی با فوم آلومینیوم خالص مقایسه شدند. این مقاله روی افت تراگسیل صدا (اِس‌تی‌اِل) در فوم‌های آلومینیوم، آلومینیوم- 3 درصد وزنی نانولوله کربنی و آلومینیوم- 3 درصد وزنی نانوصفحه گرافنی متمرکز شده است. نتایج نشان دادند که افزودن 3 درصد وزنی نانولوله کربنی و 3 درصد وزنی نانوصفحه گرافنی به ترتیب حدود 20 و 7 دسی‌بل افت تراگسیل صدا در مقایسه با فوم آلومینیوم خالص ایجاد می‌نماید. عملکرد بهتر نانولوله‌ها در مقایسه با نانوصفحات به دلیل بروز پدیده گرماصوتی در نانولوله و در نتیجه تبدیل انرژی صوتی به حرارتی است.}, keywords_fa = {افت تراگسیل صدا, فوم کامپوزیتی آلومینیوم- نانولوله کربنی, فوم کامپوزیتی آلومینیوم- نانوصفحه گرافنی, پدیده گرماصوتی.}, url = {http://joasi.ir/article-1-220-en.html}, eprint = {http://joasi.ir/article-1-220-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {GhasemiYeklangi, A. and EsmaeelzadehKhadem, S.}, title = {Electric energy generation from acoustic waves using triboelectric nanogenerator (Research Article)}, abstract ={Triboelectric nanogenerators are a new generation of transducers of mechanical energy to electric energy which have attracted great attention because of their high performance. In this research a new kind of triboelectric nanogenerators with a unique structure is fabricated. It can transform environment acoustic noise into electric energy. The structure of this nanogenerator is investigated with scanning electron microscopy and the existence of poly vinylidene fluoride nanofibers is verified. Furthermore, the nanogenerator has potential of use as a selfpowered microphone. Results of acoustic tests showed that putting the nanogenerator in a acoustic pressure field with 90 dB intensity and 90 Hz frequency can generate open circuit voltage of 70V peak to peak.}, Keywords = {Triboelectric Nanogenerator, Acoustic waves, Electrospinning, Nanofibers, Poly vinylidene fluride.}, volume = {9}, Number = {1}, pages = {100-104}, publisher = {Acoustical Society of Iran}, title_fa = {تولید انرژی برقی از امواج صوتی با استفاده از نانومولد تریبوبرقی (مقاله پژوهشی)}, abstract_fa ={نانومولدهای تریبوبرقی نسل جدیدی از تراگذارهای انرژی مکانیکی به انرژی برقی هستند که به دلیل عملکرد بالا توجه بسیاری را به خود جلب کرده‌‌اند. در این پژوهش نوع جدیدی از نانومولدهای تریبوبرقی با ساختاری منحصر به فرد ساخته شده است. این ساختار می‌تواند نوفه صوتی موجود در محیط را به انرژی برقی تبدیل کند. ساختار این نانومولد توسط میکروسکوپ الکترونی روبشی مورد بررسی قرار گرفت و وجود نانوالیاف‌های پلی‌‌وینیلیدن فلوراید تایید شد. بعلاوه، این نانومولد قابلیت استفاده به عنوان یک میکروفون خود توان را دارد. نتایج آزمون‌‌های صوتی نشان دادند که با قرار دادن این نانومولد در یک میدان فشار صوتی با شدت 90 د‌‌سی‌‌بل و بسامد 90 هرتز، می‌تواند ولتاژ مدار باز اوج به اوج 70 ولتی تولید کند.  }, keywords_fa = {نانومولد تریبوبرقی, امواج صوتی, برقاریسی, نانوالیاف, پلی‌‌وینیلیدن‌‌فلوراید.}, url = {http://joasi.ir/article-1-215-en.html}, eprint = {http://joasi.ir/article-1-215-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {MajidyNik, M.}, title = {Sound waves propagation with different frequencies in the Persian Gulf (Technical Note)}, abstract ={The propagation of sound waves in shallow water is complex and unknown due to the special conditions of the surface and bed of water bodies. In recent years, the use of a wide range of application software to recognize this effect on the propagation of sound waves to improve the performance of sonar systems has increased. In shallow water and coastal areas, the interference caused by surface and seabed reflections is very important and effective. Several methods have been developed to model the propagation of sound waves. In the present research, the method of parabolic equations by considering the frequencies of 500, 1000 and 10000 Hz for the transmitter has been used to model the propagation of sound waves in the Persian Gulf. The results showed that the effects of the seabed are the main factor attenuating the energy of sound waves. Also, the highest penetration of sound waves in the bed layers occurred at frequencies lower than 1 kHz. The interaction of sound beams with the seabed is also increased, with increasing the depth of the transmitter and as a result more loss in the transmission path is recorded.}, Keywords = {Sound waves propagation, Parabolic equations, Seabed loss, Actup model, Persian Gulf.}, volume = {9}, Number = {1}, pages = {105-113}, publisher = {Acoustical Society of Iran}, title_fa = {انتشار امواج صدا با بسامدهای مختلف در خلیج‌فارس (یادداشت فنی)}, abstract_fa ={انتشار امواج صدا در آب‌های کم‌عمق به دلیل ماهیت خاص شرایط سطح و بستر توده‌های آبی، پیچیده و ناشناخته می‌باشد. در سال‌های اخیر استفاده از طیف وسیعی از نرم‌افزارهای کاربردی جهت شناخت این اثرگذاری بر انتشار امواج صدا جهت بهبود عملکرد سامانه‌های سوناری افزایش یافته است. در محیط‌های کم‌عمق و مناطق ساحلی تداخل ایجاد شده ناشی از بازتاب‌های سطح و بستر دریا بسیار مهم و تاثیرگذار هستند. روش‌های متعددی برای الگوسازی انتشار امواج صدا توسعه داده شده‌اند. روش نظری پرتو، مدهای بهنجار (نرمال)، انتگرال‌گیری عدد موج و معادلات سهموی از جمله روش‌های الگوسازی انتشار امواج صدا می‌باشند. در طرح حاضر، از روش معادلات سهموی با در نظر گرفتن بسامد‌های 500، 1000 و 10.000 هرتز برای فرستنده جهت الگوسازی انتشار امواج صدا در خلیج فارس استفاده شده است. نتایج نشان دادند که اثرات بستر عامل اصلی تنکش (تضعیف) انرژی امواج صدا است. هم‌چنین بیش‌ترین نفوذ امواج صدا در لایه‌های بستر در بسامد‌های پایین و کم‌تر از 1 کیلوهرتز رخ داده و با افزایش عمق فرستنده، برهم‌کنش پرتوهای صدا با بستر نیز افزایش یافته و به تبع آن اتلاف بیش‌تری در مسیر انتقال ثبت شده است.}, keywords_fa = {انتشار امواج صدا, معادلات سهموی, اتلاف بستر, خلیج فارس.}, url = {http://joasi.ir/article-1-155-en.html}, eprint = {http://joasi.ir/article-1-155-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2021} } @article{ author = {ZhulayiBakhoda, N. and Salehi, H.}, title = {Investigation of the phononic and thermal properties of tungsten disulfide compound using density functional theory (Research Article)}, abstract ={In this paper, the phononic and thermal properties of tungsten disulfide have been studied. The aim of this study was to investigate the phonon and thermal properties such as heat capacity and enthalpy. The calculations are performed within the framework of density functional theory by pseudo-potential methood and by Quantum Espresso computational package and their exchange-correlation function is of LDA and GGA type. From the study of thermal properties, we find that the drop in heat capacity at low temperatures is T3. At high temperatures, the heat capacity approaches (3NKB =71.673J / K.mol Dulong-Petit law). Also, the specific heat value and entropy of this compound at room temperature were 65.221 J / K.mol and 68.757 J / K.mol, respectively. In the phonon scattering diagram, 3 Acoustic branches and 15 optical branches were obtained. Also, the phonon scatter diagram and the density of phonon states were compared in terms of state matching. The results obtained are consistent with other available data.}, Keywords = {Tungsten disulfide, Density functional theory, Phonon modes, Heat capacity.}, volume = {9}, Number = {2}, pages = {1-8}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی ویژگی‌های فونونی و گرمایی ترکیب تنگستن دی‌سولفید با استفاده از نظریۀ تابعی چگالی (مقاله پژوهشی)}, abstract_fa ={در این مقاله خواص فونونی و گرمایی ترکیب تنگستن دی‌سولفید مورد بررسی قرار گرفته است. هدف از این مطالعه بررسی ویژگی‌های فونونی و گرمایی مانند ظرفیت گرمایی و آنتالپی است. محاسبات در چارچوب نظریۀ تابعی چگالی با روش شبه پتانسیل و توسط بستۀ محاسباتی کوانتوم اسپرسو انجام شده‌اند و تابع تبادلی- همبستگی آن‌ها از نوع اِل‌دیی‌اِی و جی‌جی‌اِی است. از مطالعۀ خواص گرمایی مشخص می‌شود که افت ظرفیت گرمایی در دماهای پایین، به صورت 3T است. در دماهای بالا نیز ظرفیت گرمایی به  71/673=NKB3 ژول بر کلوین در مول (قانون دولون- پتی) نزدیک می‌شود. هم‌چنین مقدار گرمای ویژه و آنتروپی این ترکیب در دمای اتاق به ترتیب برابر 65/221 ژول بر کلوین در مول و 68/757 ژول بر کلوین در مول به‌دست آمد. در نمودار پراکندگی فونونی تعداد سه شاخۀ صوتی و 15 شاخۀ نوری به‌دست آمدند. هم‌چنین نمودار پراکندگی فونونی و چگالی حالت‌های فونونی از لحاظ تطابق حالت‌ها مقایسه شدند. نتایج به‌دست‌آمده با دیگر داده‌های موجود سازگاری دارند.}, keywords_fa = {تنگستن دی‌سولفید, نظریۀ تابعی چگالی, مدهای فونونی, ظرفیت گرمایی.}, url = {http://joasi.ir/article-1-206-en.html}, eprint = {http://joasi.ir/article-1-206-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Ahmadi, Z.A. and MokhtariDizaji, M. and Sadeghpour, A. and Khesali, H. and Firouzi, A.}, title = {Evaluation of strain and strain rate parameters using two-dimensional speckle-tracking echocardiography in patients with coronary artery disease (Research Article)}, abstract ={The study aimed was to measure left ventricular (LV) strain using speckle tracking echocardiography (STE) for assessment of LV function. Eighty-two subjects (mean age 57±9 years) with suspected chest pain underwent two-dimensional (2D)-echocardiography before coronary angiography. Conventional echocardiographic parameters were used for the assessment of LV function. Longitudinal strain and its strain rate (SR) and circumferential strain, and its SR with 2D-STE were calculated for the assessment of myocardial function. According to the angiography results, patients were divided into two groups: CAD patients (n=60) and healthy group (n=22). There was a significant decrease in longitudinal and circumferential strain and strain rate in patients with CAD compared to healthy individuals (longitudinal strain in patients -16.2±2.4 vs -19.5±2.1 for a healthy group) (P-value<0.05). Discriminate analysis of longitudinal and circumferential strain with values of 78% and 83% indicated the highest sensitivity respectively. ST as a non-invasive method for measurement of strain and strain rate parameters is proposed in the early diagnosis of LV dysfunction in patients with CAD.  }, Keywords = {Strain, Left ventricular function, Speckle tracking echocardiography.}, volume = {9}, Number = {2}, pages = {9-18}, publisher = {Acoustical Society of Iran}, title_fa = {ارزیابی شبه‌سنج‌های کرنش و آهنگ کرنش با استفاده از فنّ ردگیری-اسپیکل اکوکاردیوگرافی دو- بعدی در بیماران مبتلا به تنگی شریان کرونر (مقاله پژوهشی)}, abstract_fa ={هدف این مطالعه اندازه‌گیری کرنش با استفاده از ردیابی اسپیکل اکوکاردیوگرافی در بیماران مبتلا به تنگی شریان کرونری برای ارزیابی عملکرد بطن چپ بود. 82 فرد مشکوک به درد قفسه سینه (میانگین سنی 9±57 سال، مرد) قبل از مراجعه به آنژیوگرافی تحت اکوکاردیوگرافی دو- بعدی قرار گرفتند. شبه‌سنج‌های معمول اکوکاردیوگرافیک برای ارزیابی عملکرد بطن چپ مورد استفاده قرار گرفتند. کرنش طولی به همراه آهنگ کرنش آن و هم­چنین کرنش محیطی به همراه آهنگ کرنش آن با استفاده از فنّ ردیابی اسپیکل اکوکاردیوگرافی برآورد شد. با توجه به نتایج آنژیوگرافی 60 مورد از افراد مراجعه‌کننده در گروه بیماران مبتلا به تنگی شریان کرونری و 22 نفر در گروه افراد سالم تقسیم‌بندی شدند. کاهش قابل ‌توجهی در مقادیر کرنش طولی و محیطی بیماران مبتلا به تنگی نسبت به افراد سالم وجود داشت (کرنش طولی بیماران 2/4±16/2- در برابر گروه سالم 2/1±19/5- و کرنش محیطی بیماران 2/5±17/6- در برابر گروه سالم 4/8±22/3-) (عدد پی کم­تر از 0/05). تحلیل تشخیص حاصل از شبه‌سنج‌های کرنش طولی و محیطی به‌ترتیب با مقادیر 78 درصد و 83 درصد بالاترین حساسیت را نشان دادند. شبه‌سنج‌های آهنگ کرنش طولی و محیطی به‌ترتیب با حساسیت 72 درصد و 75 درصد گزارش گردید. ردیابی اسپیکل به عنوان یک روش غیرتهاجمی برای محاسبه کرنش و آهنگ کرنش در تشخیص اولیه اختلال در عملکرد بطن چپ در بیماران مبتلا به تنگی شریان کرونری معرفی شد.}, keywords_fa = {کرنش, عملکرد بطن چپ, ردیابی اسپیکل اکوکاردیوگرافی.}, url = {http://joasi.ir/article-1-222-en.html}, eprint = {http://joasi.ir/article-1-222-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Gholizadeh, F. and Ghaffari, A. and Keynezhad, M.A.}, title = {1/3 Octave band analysis of physical form in the great historical mosques of Tabriz (Research Article)}, abstract ={Mosques are among the buildings that sound has a special role in the explanation of their quality. It seems that different physical forms in mosques also play a role in the field of acoustics, domed, columned and arched buildings offer different qualities of sound. To analyze this feature, the current study has selected 5 samples of large historical mosques in Tabriz as a study sample, which are classified into 5 formal groups. The method is field research based on ISO3382 and visual surveys and Background Noise, Sound Pressure Level and Reverberation Time were measured in the empty position of the samples and at two standing and sitting heights to simulate the prayer positions. Findings of the study consider the arched form to have a balanced behavior, evaluating the maximum RT both at standing and sitting position at a frequency of 100 Hz and related to the domed sample. Another part of the findings, according to the visual surveys, shows that the combination of spatial elements plays a great role in the distribution of sound, and the scattering of the main frequencies of the speech in all the mosques is desirable and intense.}, Keywords = {Architecture, Acoustics, Physical form, Great mosques.}, volume = {9}, Number = {2}, pages = {19-29}, publisher = {Acoustical Society of Iran}, title_fa = {تحلیل یک‌سوم اوکتاوی ساختار کالبدی در مساجد بزرگ تاریخی تبریز (مقاله پژوهشی)}, abstract_fa ={مساجد جزو بناهایی هستند که صدا در تبیین کیفیت آن‌ها جایگاه ویژه‌ای دارد. به نظر می‌رسد ساختار کالبدی متفاوت در مساجد، در حوزه صوتیّات نیز ایفای نقش می‌کند، بناهای گنبددار، ستون‌دار و طاقی کیفیت متفاوتی از صدا ارائه می‌دهند. پژوهش کنونی در راستای تحلیل این ویژگی، پنج نمونه از مساجد بزرگ تاریخی تبریز را به عنوان نمونه مطالعه انتخاب کرده است که در پنج گروه کالبدی دسته‌بندی شده‌اند. ابزار پژوهش، سنجش میدانی با استناد به ایزو 3382 و تصویربرداری صوتی بوده و نوفه زمینه، تراز فشار صدا و زمان واخنش در وضعیت خالی نمونه‌ها و در دو ارتفاع ایستاده و نشسته به منظور شبیه‌سازی حالات نمازگزار اندازه‌گیری شده است. یافته‌های پژوهش فرم طاقی را دارای رفتاری متعادل دانسته، بیش‌ترین زمان واخنش را هم در ارتفاع ایستاده و هم در حالت نشسته در بسامد 100 هرتز و مربوط به نمونه گنبددار ارزیابی می‌نماید. بخش دیگری از یافته‌ها با توجه به برداشت‌های تصویری نشان می‌دهند تلفیق عناصر فضایی، نقش بیش‌تری در انتشار و پخش صدا ایفا می‌کنند و پراکندگیِ اصلی‌ترین بسامدهای حوزه گفتار در همه مساجد مورد مطالعه مطلوب و پرشدت است.}, keywords_fa = {معماری, صوتیّات, ساختار کالبدی, مساجد بزرگ.}, url = {http://joasi.ir/article-1-210-en.html}, eprint = {http://joasi.ir/article-1-210-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Shahriari, B.}, title = {Calculation of the drop in sound pressure level and frequency analysis of aerospace engine test cell (Research Article)}, abstract ={Aerospace engines testing is a source of noise pollution and determining the low frequency acoustic characteristics of the test cell, plays an important role in optimally control of the sound field and reducing the level of sound pressure and pollution. In this study, the drop in average sound pressure level is numerically predicted by constructing a test cell according to ISO 140 standard. To solve the sound propagation equations, modeling the contact between the structure and the fluid, dynamic coupling of the structure and the fluid is performed and to calculate the acoustic energy distribution in the fluid and the structure, Abaqus finite element software is used. Cells with different dimensions and insulation and simply support conditions are modeled and the average sound pressure level drop of each model is calculated and compared. The optimal dimensions of the cell are determined, then the independence of the mesh is checked and the results are verified using experimental data. The measured sound pressure drop values are reported for the quarter band. To ensure that it is not resonated by acoustic force, the frequency analysis of the structure was performed and it was determined that the designed test cell eliminates noise pollution. Cell size optimization shows that the best test cell radius for the 90 to 150 Hz frequency range is 2.25 m.}, Keywords = {Acoustics, Sound pressure drop, Frequency analysis, Sound insulation, Aerospace engine test cell.}, volume = {9}, Number = {2}, pages = {30-40}, publisher = {Acoustical Society of Iran}, title_fa = {محاسبه افت تراز فشار صدا و تحلیل بسامدی اتاق آزمون موتورهای هوافضایی (مقاله پژوهشی)}, abstract_fa ={آزمون موتورهای هوافضایی منبع آلودگی صوتی است و تعیین مشخصات صوتی بسامد پایین اتاق آزمون، جهت کنترل بهینه میدان صوتی و کاهش تراز فشار صدا و آلودگی نقش بسزایی دارد. در مطالعه حاضر افت تراز فشار صدای متوسط به واسطه ساخت اتاق آزمون طبق استاندارد ایزو 140 به‎‌طور عددی پیش‌بینی می‌شود. برای حل معادلات انتشار صوتی، الگو‌سازی تماس بین سازه و سیال، کوپلینگ دینامیکی سازه و سیال انجام شده و برای محاسبه توزیع انرژی صوتی در سیال و سازه، از نرم‌افزار عنصر متناهی آباکوس استفاده می‌گردد. اتاق‌هایی با ابعاد و عایق‌های مختلف و شرایط تکیه‌گاهی ساده و گیردار الگو‌سازی و افت تراز فشار صدای متوسط هر الگو محاسبه و مقایسه می‌شوند. ابعاد بهینه اتاق تعیین شده، سپس استقلال از مش بررسی و نتایج با استفاده از داده‌های تجربی صحت‌سنجی می‌گردد. مقادیر افت تراز فشار صدای اندازه‌گیری شده برای اکتاو باند یک چهارم گزارش شده است. برای اطمینان از عدم بازآوایش (تشدید) در اثر نیروی صوتی، تحلیل بسامدی سازه انجام و مشخص گردید که اتاق آزمون طراحی شده آلودگی صوتی را از بین می‌برد. بهینه‌سازی اندازه اتاق نشان می‌دهد که بهترین شعاع اتاق آزمون برای محدوده بسامدی 90 تا 150 هرتز شعاع 2/25 متر است.}, keywords_fa = {صوتیّات, افت فشار صدا, تحلیل بسامدی, عایق صوتی, اتاق آزمون موتورهای هوافضایی.}, url = {http://joasi.ir/article-1-212-en.html}, eprint = {http://joasi.ir/article-1-212-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Salehi, H. and ToulabiNejad, H.}, title = {Investigation of phononic and thermal properties of InP by using pseudopotential method (Research Article)}, abstract ={In this paper, according to the  density functional theory and semiharmonic approximation and solving kohen's equations using plane wave, band structure, phonon scattering; Dielectric tensor, Bourne effective charge, Raman cross-section; We calculated the infrared and specific heat capacity of indium phosphide in two-phase structures on zincblend (ZB) and salt rock (Rs). The results show that this compound is more crystalline and stable in the Zb phase. Examination of phonon modes shows the existence of IR modes in both phases. Also, the effective boron charge values ​​are close to the nominal ion values, which indicates the ion bond in this system. The calculated phonon spectrum shows a frequency gap in the range of 1179 to 288 cm-1, which will be fully reflected in this range. Also, the specific heat capacity at high temperatures is close to an asymptotic value that is highly consistent with experimental results.}, Keywords = {InP, Dielectric tensor, Phonon spectrum, Semi-harmonic approximation, Specific heat.}, volume = {9}, Number = {2}, pages = {41-51}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی ویژگی‌های صوتی و گرمایی ایندیوم فسفید با استفاده از روش شبه‌پتانسیل (مقاله پژوهشی)}, abstract_fa ={در این مقاله با توجه به نظریۀ تابعی چگالی و تقریب شبه‌هماهنگ و حل معادلات کوهن شم با استفاده از پایه‌های موج تخت ساختار نواری، پاشندگی فونونی؛ تانسور دی‌الکتریک، بار مؤثر بورن، سطح مقطع رامان؛ فروسرخ و ظرفیت گرمای ویژه ایندیوم فسفید در دو ساختار بلند روی (zb) و سنگ نمکی (Rs) محاسبه شد. نتایج به دست آمده نشان می‌دهند که این ترکیب در فاز Zb متبلورتر و پایدارتر می‌باشد. بررسی مُدهای فونونی وجود مُدهای فروسرخ را در هر دو فاز نشان می‌دهد. هم‌چنین مقادیر بارهای مؤثر بورن به مقادیر یونی اسمی نزدیک هستند که بیانگر پیوند یونی در این سامانه است. طیف فونونی محاسبه‌شده یک گاف بسامدی را در محدودۀ 179 تا  288 هرتز نشان می‌دهد که در این محدوه بازتاب کامل رخ می‌دهد. هم‌چنین ظرفیت گرمایی ویژه در دماهای بالا به یک مقدار مجانبی نزدیک می‌شود که با واقعیات تجربی سازگاری خوبی دارد.}, keywords_fa = {ایندیوم فسفید, تانسور دی‌الکتریک, طیف فونونی, تقریب شبه هماهنگ, گرمای ویژه.}, url = {http://joasi.ir/article-1-198-en.html}, eprint = {http://joasi.ir/article-1-198-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Shahidani, A. and MokhtariDizaji, M. and Shankaii, Z. and Najafi, M.}, title = {Modeling and investigating the effect of ultrasound waves pressure on the microbubble oscillation dynamics in microvessels containing an incompressible fluid (Research Article)}, abstract ={Understanding the dynamics of microbubble oscillation in an elastic microvessel is important for the safe and effective applications of ultrasound contrast agents in imaging and therapy. Numerical simulations based on 2D finite element model are performed to investigate the effect of acoustic parameters such as pressure and frequency on the dynamic interaction of the fluid-blood-vessel system. The results show that acoustic waves cause bubble oscillation, pressure on the vessel wall as well as vascular deformation. For a bubble (with a radius of 1.5 μm) in a microvessel with a radius of 5 μm exposed to ultrasonic waves with a frequency of 1 MHz and out put pressures of 0.25 MPa, 0.22 MPa, 0.18 MPa and 0.13 MPa the modeling has been done. It can be seen that with increasing ultrasound pressure, the radius of the bubble changes, the displacement of the vessel wall and the pressure and also shear stress on the vessel wall increase. Also, by increasing the initial radius of the microbubble (1.5, 2.5 and 2.5 micrometers) at constant radiant wave pressure, the pressure on the capillary wall and the amount of capillary wall displacement increase. With increasing capillary wall diameter (1, 1.5, 2 and 2.5 μm) at constant radiant wave pressure, no significant change in pressure applied to the capillary wall and capillary wall displacement is observed. This work was evaluated with the simulation results of other researchers.}, Keywords = {Ultrasound waves, Microbubble, Incompressible fluid, Ultrasound waves pressure, Blood-brain barrier, Shear stress.}, volume = {9}, Number = {2}, pages = {52-60}, publisher = {Acoustical Society of Iran}, title_fa = {الگو‎سازی و بررسی تأثیر فشار امواج فراصدا بر دینامیک نوسان ریزحباب داخل ریزرگ حاوی سیال تراکم ناپذیر (مقاله پژوهشی)}, abstract_fa ={ فهم دینامیک نوسان ریزحباب در ریزرگ کشسان برای کاربردهای ایمن و مؤثر مواد حاجب فراصدا در تصویربرداری و درمان اهمیت دارد. هدف از این تحقیق الگو‎سازی و بررسی تأثیر فشار امواج فراصدا روی برهم‎کنش دینامیک سامانه سیال- ریزحباب- رگ، است. این الگوسازی برای ریزحبابی با شعاع 1/5 میکرومتر در ریزرگی با شعاع 5 میکرومتر که تحت تابش امواج فراآوایی با بسامد 1 مگاهرتز و فشارهای خروجی 0/25 مگاپاسکال، 0/22 مگاپاسکال، 0/18 مگاپاسکال و 0/13 مگاپاسکال قرار گرفته، انجام شده ‎است. نتایج نشان می‌دهند با افزایش فشار امواج فراصدا تغییر شعاع ریزحباب، جابه‎جایی دیواره مویرگ، فشار و هم‌چنین تنش برشی وارد بر دیواره مویرگ نیز افزایش می‎یابد. هم‌چنین با افزایش شعاع اولیه‌ی ریزحباب (1/5، 2 و 2/5 میکرومتر) در فشار امواج تابشی ثابت، فشار وارد بر دیواره مویرگ و میزان جابه‌جایی دیواره مویرگ نیز افزایش می‌یابند. با افزایش قطر دیواره مویرگ (1، 1/5، 2 و 2/5 میکرومتر) در فشار امواج تابشی ثابت، تغییر محسوسی در فشار اعمال‌شده به دیواره مویرگ و هم‌چنین جابه‌جایی دیواره مویرگ مشاهده نمی‌شود. برای اعتبارسنجی از نتایج حاصل از مطالعات شبیه‌سازی محققان دیگر استفاده می‌شود.}, keywords_fa = {امواج فراصدا, ریزحباب, سیال تراکم‌ناپذیر, فشار امواج فراصدا, سد خونی- مغزی, تنش برشی.}, url = {http://joasi.ir/article-1-224-en.html}, eprint = {http://joasi.ir/article-1-224-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Zarepour, V. and Ezam, M. and AllahyariBeik, S. and AliakbariBidokhti, A.}, title = {The impact of wind-generated bubble layer on matched field sound source localization in shallow water (Research Article)}, abstract ={This paper investigates the effect of the wind-generated bubble layer on the underwater sound source localization in the Persian Gulf shallow-water environment through computer simulation and the matched field processing technique. An underwater sound source of 2-10 kHz located at depths of 10, 45, and 75 m was considered at a distance of 4 km from a linear vertical receiver array. The estimation of the source range and depth was performed in the match condition using the maximum-likelihood matched field processor. Next, the errors due to the effect of the sound-speed mismatch of the bubble layer (affected by different wind speeds) were extracted. The results showed that, although errors increased by increasing the degree of the mismatch and by increasing the source frequency, the error values are significant (above 1%) only at frequencies greater than or equal to 8 kHz for wind speeds greater than 8 m/s. Also, the maximum error in estimating the range and depth of the source is 2.5% and 4.5%, respectively. Besides, the values of these errors were dependent on the source depth, so the errors for the sound source located at depth 10 m (closer to the bubble layer) were more than the errors in the other two source depths.}, Keywords = {Wind-generated bubble layer, Source localization, Mismatch, Range-depth ambiguity surface, Matched field processing.}, volume = {9}, Number = {2}, pages = {61-75}, publisher = {Acoustical Society of Iran}, title_fa = {تأثیر لایه حبابی ناشی از باد بر مکان‌یابی منبع صدا به روش میدان تطبیقی در آب کم‌عمق (مقاله پژوهشی)}, abstract_fa ={این مقاله از طریق شبیه‌سازی رایانه‌­ای و با استفاده از روش پردازش میدان تطبیقی، اثر لایه حبابی ناشی از باد را بر مکان­‌یابی منبع صوتی زیرآبی در محیط کم ­عمق خلیج فارس بررسی می‌نماید. یک منبع صوتی زیرآبی با بسامد 2-10 کیلوهرتز در فاصله چهار کیلومتری از یک آرایه گیرنده عمودی خطی، در عمق­ های 10، 45 و 75 متری در نظر گرفته شد. با استفاده از پردازش‌گر میدان تطبیقی بیشینه- لایک‌لیهود، تخمین برد و عمق منبع در حالت تطابق انجام گردید. سپس خطاهای تخمین ناشی از اثر عدم ‌تطابق در سرعت صوتی لایه حبابی (متأثر از سرعت­ های باد مختلف) استخراج شدند. نتایج نشان دادند که اگر چه با افزایش درجه عدم ‌تطابق و بسامد منبع، خطای مکان‌یابی افزایش می‌یابد، اما مقادیر خطا تنها برای سرعت‌های باد بیش از 8 متر بر ثانیه، در بسامد­های بزرگ‌تر و مساوی 8 کیلوهرتز قابل‌توجه (بیش از 1 درصد) است. هم‌چنین برای بیش‌ترین درجه عدم ‌تطابق در بالاترین بسامد مورد نظر، مقدار بیشینه خطا در تخمین برد و عمق منبع به ترتیب 2/5 و 4/5 درصد است. به‌علاوه میزان این خطاها به عمق منبع وابسته است، به‌طوری‌که برای منبع واقع در عمق 10 متری (نزدیک‌تر به لایه حبابی) نسبت به دو عمق منبع دیگر، خطا بیش‌تر است.}, keywords_fa = {لایه حبابی ناشی از باد, مکان‌یابی منبع, عدم تطابق, صفحه ابهام برد- عمق, پردازش میدان تطبیقی.}, url = {http://joasi.ir/article-1-217-en.html}, eprint = {http://joasi.ir/article-1-217-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {mehrnegar, M.M. and GhasemiYeklangi, A. and EsmaeelzadehKhadem, S.}, title = {Design and fabrication of an ultrasonic thermoacoustic generator using metal nanocoatings (Research Article)}, abstract ={In this paper, we design, simulate, and build an ultrasonic heat generator. In thermoacoustics, heat generated by the passage of alternating current through a thin conductor produces a sound wave. In this method, unlike other methods of sound production, moving parts are not used to vibrate air molecules, and as a result, the frequency response of these generators is flatter than other sound generators and they are used in a wider range. In this study, samples of sound generators were made using different conductive materials and different structures and measured in the laboratory. The study aimed to construct an ultrasonic generator with a wide and flat frequency response in the frequency range of 50 to 90 kHz. The results obtained from the measurements show the ability to produce sound with a sound pressure level of 90 decibels at frequencies of 40 to 90 kHz and suitable stability for long operation.}, Keywords = {Acoustics, Thermoacoustics, Heat, Sound generation.}, volume = {9}, Number = {2}, pages = {76-80}, publisher = {Acoustical Society of Iran}, title_fa = {طراحی و ساخت مولد فراآوایی گرماصوتی با استفاده از نانوپوشش‌‌های فلزی (مقاله پژوهشی)}, abstract_fa ={در این مقاله، به طراحی، شبیه‌سازی و ساخت یک مولد فراآوای گرما صوتی پرداخته می‌شود. در گرماصوتیّات، حرارت ایجادشده به‌وسیله عبور جریان برقی متناوب از یک رسانا با ضخامت کم به تولید موج صوتی منجر می‌شود. در این روش برخلاف سایر روش‌های تولید امواج صوتی از قطعات متحرک برای ارتعاش مولکول‌های هوا استفاده نمی‌شود و در نتیجه پاسخ بسامدی این مولدها نسبت به سایر مولدهای صوتی تخت تر بوده و در بازه وسیع‌تری کاربرد دارند. در این پژوهش نمونه‌هایی از مولد صوتی با استفاده از مواد رسانای مختلف و ساختارهای متفاوت ساخته شده و در آزمایشگاه مورد اندازه‌گیری قرار گرفتند. هدف این تحقیق، ساخت یک مولد فراآوا با پاسخ بسامدی پهن و مسطح در محدوده‌ی بسامدی 50 تا 90 کیلوهرتز بود. نتایج به‌دست آمده از اندازه‌گیری‌ها قابلیت تولید امواج صوتی با تراز فشار صوتی 90 دسی‌بل در بسامدهای 40 تا 90 کیلوهرتز و پایداری مناسب برای کارکرد طولانی را نشان می‌دهند.}, keywords_fa = {صوتیّات, گرما صوتی, حرارت, تولید صدا.}, url = {http://joasi.ir/article-1-216-en.html}, eprint = {http://joasi.ir/article-1-216-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Ahmadi, A.}, title = {Investigating the formal effect of rear wall structure on acoustic parameters of speech halls (Research Article)}, abstract ={Referring to the rear wall in a hall is the furthest element rather than the voice source, therefor the reflections of this structural member play important role in music and speech intelligibly, especially for one-third behind audiences. Hence the form of these structures can be very effective in the acoustical quality of speech halls and auditoria. In this study, four formic structures are examined in EASE acoustical software. Duo to results, the columned shape structure was more optimum in speech range and concave shape was most reverberant. Along with this research, halls with plane and concave shape were proposed for music performances and convex as well as columned shapes for speech approaches. The achieved results can be used for other effective walls in similar studies.}, Keywords = {Acoustical investigation, Speech hall, Rear wall, Acoustical simulation.}, volume = {9}, Number = {2}, pages = {81-89}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی تأثیر شکلی ساختار دیوار انتهایی بر شبه‌سنج‌های صوتی تالار‌های سخنرانی (مقاله پژوهشی)}, abstract_fa ={با توجه به اینکه دیوار انتهایی یک تالار دورترین جداره نسبت به منبع صدا در این‌گونه فضاها می‌باشد، بنابراین بازتاب‌ها از این جداره نقش مهمی در فهم موسیقی و گفتار خصوصاً برای حضار واقع در یک سوم انتهایی این فضاها دارد. از این‌رو شکل این دیوار می‌تواند نقش بسزایی در کیفیت صوتی فضا‌های مرتبط با صدا داشته باشد. در این مطالعه چهار ساختار شکلی در نرم‌افزار صوتی ایی‌اِی‌اِس‌ایی مورد بررسی قرار گرفت. طبق نتایج به‌دست آمده دیواره‌ی با شکل ستون‌دار عملکرد بهتری در حوزه گفتار داشت. در این میان جداره مقعر پرطنین‌تر و اصطلاحاً دارای عملکرد واخنشی بیش‌تری نسبت به سایر ساختارها بود. در خلال پژوهش، تالار‌های با دیواره‌ی مقعر و ساده برای کاربری اجرای موسیقی و کنسرت و تالارهای با دیواره محدب و ستون‌دار برای کاربری کنفرانس و سخنرانی پیشنهاد شدند. نتایج حاصل از این پژوهش می‌تواند برای سایر مطالعات جهت بررسی دیگر جداره‌های تاثیرگذار از لحاظ صوتی و پیشنهاد ساختاری فضاهای مرتبط با امواج صوتی باشد.}, keywords_fa = {تحلیل صوتی, تالار سخنرانی, جداره انتهایی, شبیه‌سازی صوتی.}, url = {http://joasi.ir/article-1-214-en.html}, eprint = {http://joasi.ir/article-1-214-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Salehi, H. and Amiri, P. and ZakaviMoghadam, H.}, title = {Investigation of phononic and thermal properties of the compound FeAl and Fe3Al using pseudopotentials method (Research Article)}, abstract ={Iron aluminide intermetallic compound, including compounds that have great features is that it's so great properties, due to its increasing use in industry is different. In thiswork, structural and dynamic properties of FeAl compounds including the structure of energybands, density of states, phonon and thermal properties in two-phase structures regularly evaluated and calculated. Calculations using a Pseudoptential, within the framework of density functional theory have been studied PWscf code. The study found that the combination of these features in your base has a metal in ferromagnetic order, the results of the electronicstructure of this compound are indicative of metal and the structure of the electron cloud indicates the ionic bond -covalent for two phases results in good agreement with the experimental results are available.}, Keywords = {FeAl, Thermal properties, Density functional theory, PWscf.}, volume = {9}, Number = {2}, pages = {90-97}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی ویژگی‌های فونونی و گرمایی ترکیبات FeAl و Fe3Al با استفاده از شیوه شبه‌پتانسیل (مقاله پژوهشی)}, abstract_fa ={در این کار ویژگی‌های دینامیکی ترکیب FeAl از جمله ساختار فونونی و ویژگی‌های گرمایی در دو فاز منظم 3Do و 2B مورد بررسی و محاسبه قرار گرفته است. محاسبات با استفاده از روش شبه‌پتانسیل، در چارچوب نظریۀ تابعی چگالی و با بستۀ نرم‌افزاری کوانتوم- اسپرسو انجام شده است نتایج حاصل از بررسی ویژگی های گرمایی نشان می دهند که رفتار ظرفیت گرمایی ویژه فاز 2B در دماهای پایین به‌صورت 3T و در حد دماهای بالا به مقدار کلاسیکی قانون دولن-پتی همگرا می­شود که با نتایج تجربی سازگار است.}, keywords_fa = {آلومیناید آهن, خواص حراراتی, نظریۀ تابعی چگالی, کوانتوم- اسپرسو.}, url = {http://joasi.ir/article-1-213-en.html}, eprint = {http://joasi.ir/article-1-213-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Attarzadeh, A. and Solaimani, M.}, title = {Investigation of acoustic waves propagation in deep waters (Research Article)}, abstract ={In large aquatic environments including oceans and seas, acoustic waves are widely used due to their ease of propagation, which in addition to helping to build accurate systems and equipment, can also be very useful in analyzing and processing data. The mode of propagation depends on the mass density and speed of acoustic waves in this completely heterogeneous environment, both of which depend on parameters such as temperature, salinity and pressure. In each region of ​​this environment, the conditions of the mentioned parameters are completely unique. Therefore, as an example, two regions in the Atlantic ocean and the Indian ocean were studied and after extracting the variation of the above parameters in depth, using the applied method of transfer matrix, the amount of transmission of acoustic waves in these regions were investigated. The results show that significant changes in salinity and temperature in the layers near the surface, cause significant changes in mass density and speed of sound propagation and, consequently, sound impedance. Also, in various sedimentary layers near the ocean floor, the sound impedance experiences sudden and sharp changes, reducing the transmission by about 55%.}, Keywords = {Ocean, Acoustic waves, Transfer matrix, Transmission coefficient, Acoustic impedance.}, volume = {9}, Number = {2}, pages = {98-110}, publisher = {Acoustical Society of Iran}, title_fa = {بررسی انتشار امواج صوتی در آب‌های عمیق (مقاله پژوهشی)}, abstract_fa ={در محیط‌های عظیم آبی مانند اقیانوس‌ها و دریاها، امواج صوتی با توجه به سهولت انتشار، کاربرد وسیعی دارند که بررسی نحوه انتشار، علاوه بر کمک به ساخت سامانه‌ها و تجهیزات دقیق، می‌تواند در تجزیه و تحلیل و پردازش داده‌ها نیز بسیار مفید باشد. نحوه انتشار، به چگالی جرمی و سرعت امواج صوتی در این محیطِ کاملاً ناهمگن، وابسته است که این دو، خود به مؤلّفه‌هایی از قبیل دما، شوری و فشار بستگی دارند. در هر ناحیه از این محیط، شرایط مؤلّفه‌های ذکرشده کاملاً منحصر به‌فرد هستند، بنابراین به‌عنوان نمونه، دو ناحیه در اقیانوس اطلس و اقیانوس هند مورد مطالعه قرار گرفتند و پس از استخراج تغییرات مؤلّفه‌های بالا در عمق، با به‌کارگیری روش کاربردی ماتریس انتقال، میزان انتشار و استهلاک امواج صوتی در این نواحی بررسی شدند. نتایج نشان می‌دهند تغییرات قابل توجه شوری و دما در لایه‌های نزدیک سطح، موجب تغییرات محسوس چگالی جرمی و سرعت انتشار صوتی و به دنبال آن مقاومت ظاهری صوتی می‌شود. هم‌چنین در لایه‌های متنوع رسوبی نزدیک کف اقیانوس، مقاومت ظاهری صوتی تغییرات شدید و ناگهانی را تجربه می‌کند و کاهش حدود 55 درصدی ضریب تراگسیل را موجب می‌شود.}, keywords_fa = {اقیانوس, امواج صوتی, ماتریس انتقال, ضریب تراگسیل, مقاومت ظاهری صوتی.}, url = {http://joasi.ir/article-1-228-en.html}, eprint = {http://joasi.ir/article-1-228-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} } @article{ author = {Shafieian, M. and Ghiasvand, F.}, title = {Wind noise reduction in recorded speech using Singular Spectrum Analysis (SSA) dataset and machine learning method (Research Article)}, abstract ={In general, recording audio in different environments deals with different challenges. Wind noise in outdoors recording often leads to critical degradation to the speech signal. Because of wide band and nonstationary nature of wind noise, it is very difficult to remove it. Singular Spectrum Analysis (SSA) is a powerful method for time series analysis that is used in applications such as noise reduction, time series prediction and so on. The SSA selects and groups the principal components of the Eigen-space decomposed signals, based on their contributions; then the reconstructed main components are transferred to time domain. In our research, the SSA method combined with K-MEANS algorithm are used to reduce wind noise in speech signals. SNR and PESQ, are used to evaluate the proposed method’s results. Speech signals from TIMIT dataset and wind noise from Rheinisch-Westfälische Technische Hochschule Aachen have been utilized in this research. The results show great increase in the quality of speech signal, in terms of perceptual quality and signal to noise ratio. The proposed algorithm shows the good performance compared with other reference algorithms.}, Keywords = {Singular Spectrum Analysis, Wind noise reduction, K-MEANS algorithm, Perceptual quality, Speech signal.}, volume = {9}, Number = {2}, pages = {111-119}, publisher = {Acoustical Society of Iran}, title_fa = {کاهش اثر نوفه باد در گفتار ضبط‌شده با بهره‌گیری از مجموعه داده‌های تحلیل طیفی تکین (تطت- اِس‌اِس‌اِی) و شیوه یادگیری ماشین (مقاله پژوهشی)}, abstract_fa ={در حالت کلی ضبط صدا در محیط‌های مختلف با چالش‌های متفاوتی روبه‌رو می‌باشد. نوفه باد در فضای باز اغلب باعث افت شدید کیفیت علامت گفتار می‌شود. بنابراین باید الگوریتم‌هایی برای کاهش نوفه باد به‌کار برد. به دلیل ماهیت ناایستا و پهن‌باند بودن نوفه باد، صافی کردن (فیلتر کردن) و حذف کردن آن بسیار مشکل است. تحلیل طیفی تکین (اِس‌اِس‌اِی) یک روش قدرتمند تخمین طیفی است که از آن در کاربردهایی از جمله کاهش نوفه، پیش‌بینی سری زمانی و غیره استفاده می‌شود. الگوریتم اِس‌اِس‌اِی علامت‌ها را به فضاهای مقدار ویژه تجزیه می‌کند، مولفه‌های اصلی را براساس سهم آن‌ها انتخاب و دسته‌بندی می‌کند و سرانجام مولفه‌های مطلوب را ساخته و به حوزه زمان برمی‌گرداند. در این پژوهش از روش اِس‌اِس‌اِی و الگوریتم کِی- مینز و صافی بول به شکل ترکیبی و به‌منظور کاهش نوفه باد در علامت‌های گفتار استفاده ‌شده است. علامت گفتار مورد استفاده‌ در روند پژوهش از دادگان تی‌آی‌اِم‌آی‌تی استخراج‌شده است و نوفه باد استفاده‌شده نیز مربوط به دادگانی است که توسّط دانشگاه فنی آخن ارائه گردیده‌اند. نتایج نشان می‌دهند که روش پیشنهادی قادر است تا مقدار 51 درصد میزان کیفیت علامت گفتار را از لحاظ کیفیت ادراکی بهبود بخشد. روش ارائه‌شده در مقایسه با روش‌های مرسوم از قبیل وزن‌دهی طیفی و تفریق طیفی نتایج بهتری از خود نشان می‌دهند.}, keywords_fa = {تحلیل طیفی تکین (اِس‌اِس‌اِی), کاهش نوفه باد, الگوریتم کِی- مینز, کیفیت ادراکی, علامت گفتار.}, url = {http://joasi.ir/article-1-227-en.html}, eprint = {http://joasi.ir/article-1-227-en.pdf}, journal = {Journal of Acoustical Society of Iran}, issn = {2345-5748}, eissn = {2345-5748}, year = {2022} }